Silicone Based Defoamer

RK-900N is a general type silicone polyether defoamer, which is developed by adopting special silicone grease system and polyether with specially designed emulsification system. The silicone grease provide excellent balance. Emulsified system makes sure compatibility, diluted and shear stability. It is applied to foams produced in most aqueous and oily systems and has excellent antifoaming properties.

Item NO.:
RK-900N
Payment:
T/T; L/C at sight; DAP
Product Origin:
China
Color:
Milky white liquid
Lead Time:
≤7 days

inquiry now

Silicone Based Defoamer

Use

Industrial cleaning

Textile pre-treatment, textile auxiliaries, chemical fiber oil agent Water-based ink and coating system

Industrial circulating water treatment, other processes which cannot use silicone Adhesives

Product property:

Excellent defoaming & antifoaming performance, long-lasting resistance to decay Good compatibility with extensive systems.

Good defoaming & antifoaming performance in different aqueous and oily systems

Main physical and chemical properties:

Appearance: Milky white liquid

Active content :100%

Viscosity(25°C):500~2000mPa·s

pH value：6.5-8.5

Application Process:

RK-900N could be added directly. The volume of addition is 0.5‰～0.6%. According to your specific condition, optimum volume of addition could be adjusted. A certain concentration of thickening water for dilution (no less than 1:3) and volume of preservatives need to be added if it’s stored for a long time. If RK-900N is used immediately, you could add a certain proportion of water which the proportion is not too high, and should use it in time. During the stirring, the speed could not be too fast and mixed well is accepted.

Silicone Based Defoamer

Click to download related documents : Antifoam RK-900N

Tags :

inquiry now

Related Products

RK-300P High Antifoaming Performance Compound Defoamer

RK-300P is a modified polyether silicone compound emulsion defoamer. It has good dispersibility in the foaming system. No silicone grease precipitation and flotation.

RK-63T An Defoamer with excellent antifoaming performance

RK-63T is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and stability of dilution and shear. It has excellent antifoaming performance and stability, especially in very harsh conditions. It is used in textile dyeing, industrial cleaning, especially high temperature overflow dyeing, shear, extreme pH environment. It has good use safety in some non-silicon use fields

RK-0036 High Antifoaming Defoamer Compound

RK-0036 is a compound antifoam without precipitation after dispersing in the system.

High Efficiency Compound Antifoam Defoamer

RK-561 High Efficiency Compound Antifoam

RK-561 is a modified polyether defoamer. It has excellent antifoaming performance, especially under some very harsh conditions and high shear system. It is used in textile industry, industrial cleaning, water-based ink.

RK-T60 Excellent Anti Foaming Agent

RK-T60 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-T60 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields.

RK-857 Water Base Defoamer Emulsion

RK-857 is a polysiloxane and polyether copolymerization defoamer with special structure of the active synergist.The special structure ensures that the compatibility of the system is unchanged and the performance is greatly improved. It has strong antifoaming performance in water based flexo ink, water acrylic overprinting, pure acrylic emulsion, PVA, polyurethane emulsion especially during grinding and paint mixing.

RK-0056 Excellent Anti Foaming Agent

RK-0056 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-0056 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields.

RK-T100 Highly Efficiently Silica Antifoam

RK-T100is akind of defoaming agentwith special emulsified and silica system, which hasexcellent dynamic defoaming, anti-foaming effect and long-lasting defoaming ability, especially under the harsh conditions. Very low addition can achieve the ideal defoaming effectand reduce the effect causedby adding largely amount defoamer.The special emulsified system makes the good compatibility, diluted stability and shear stability.

High Cost-Effective Mineral Oil Defoamer Antifoam

RK-707 High Cost-Effective Mineral Oil Defoamer

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil.

RK-600P High Efficiency Cement Antifoam

RK-600P is a non-silicone defoamer grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression ability performances.

RK-801 Efficient Antifoaming Agent Emulsion

RK-801 is a defoamer specially designed for various water-based inks and latex systems. It has excellent dynamic defoaming, antifoaming performance, long-lasting defoaming ability, and excellent compatibility. It has the properties of silicon type defoamer and the compatibility of non-silicon type defoamer. It is used in inks, latex paints and coatings, which improves the leveling and wetting of inks, paints and paints, and improves the abrasion resistance and smoothness of paints.

RK-170 High Efficiency Mineral Oil Antifoam

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect.

RK-10S Pulp Washing Black Liquid Antifoam

RK-10S is a emulsion type polyether modified silicone antifoam, it has good acid&alkali, temperature, shear resistance, and stable in pulp washing black liquid system, no gel formation. Good foam control performance can be achieved by small dosage. Widely used in paper pulp production to prevent the foam issue in the production process, textile auxiliaries, textile dyeing, industrial cleaning, wastewater treatment, etc.

RK-F0020 High Degassing Peformance Antifoaming Agent

RK-F0020 is a silicone free defoaming agent prepared from special high-grade fatty alcohols as the main active substance through special emulsification, which is mainly used in degassing and control foam in the paper machine and paper making waste water treatment industries and fermentation.

RK-8455S High Concentrated Silicone Defoamer

RK-8455S is a silicone antifoam, which is prepared by composite emulsification of silicon emulsifier and hydrocarbon emulsifier based on crosslinked polysiloxane as defoaming active component. It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of pulp washing black liquid , wastewater treatment, cleaning industry, oil field chemical industry, etc.

RK-561 High Efficiency Compound Antifoam

What are you looking for?

Use smart search to quickly find what you need.

Suggested :

Silicone antifoam Fatty alcohol antifoam Polyether antifoam Antifoam compound Powder antifoam Mineral oil antifoam Other antifoam

Follow Us

Company

Hot Tags

Product

Contact Us

Rickman is a professional manufacturer of antifoams and defoamers, providing high effiective antifoaming and drainage solutions for many industries.

info@rickmanchemical.com
+86 18750669524
1267 -8Qianpu South Road Siming District, Xiamen City, Fujian Province, China( Head office) / Factory (1) address: Qitian Industrial Zone, Fujian , China

Click Here To Leave A Message

Leave A Message

inquiry now

Looking for News?

Our hours

Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)

Home

Products

contact