High efficiency and low alkali liquid deinking agent

RK-23T is a special modified organosilicon defoamer with excellent defoaming and antifoaming properties, system compatibility, excellent dispersibility. It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​

RK-1100 is a special silicone synthetic defoamer suitable for non-aqueous systems. It is a cost-effective product specially designed for film production, with excellent foam suppression performance and stability. A very small amount of addition can achieve the ideal foam control effect. ​

D105 is a high solids and efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. ​

RK-8865 is a modified silicone defoamer that has both the performance of silicone and the compatibility of non-silicone defoamers. It is widely used in water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings, and overprint varnishes. ​

RK-30N is a kind of emulsion type polyether modified silicone antifoam. Compared to traditional antifoam, it shows very good stability in the system, and good performance at high temperature. It is suitable for the internal added of textile auxiliary, such as refining agent, and internal application of daily washing liquid. ​

RK-T60 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-T60 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, They are widely used in water treatment, mining, oilfield, paper and other application industries. ​

RK-9855 is a defoaming product with outstanding defoaming ability, wide application range and excellent compatibility. It is widely used in a variety of latex systems. ​

RK-360 is a silicone polyether modified antifoam without precipitation after dispersing in the system. ​

RK-400P is a kind of polyether antifoam, which doesn’t contain mineral hydrocarbons. It’s easy to disperse in water, defoaming fast, good foam inhibition persistent. It mainly used in various power plant desulfurization, paper process and waste water treatment, etc. ​

RK-7670M uses silicone grease system, with special polyether modified silicone emulsion system. It provides excellent antifoaming performance and balance, which make sure the compatibility of system, diluted stability and excellent stability of shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the final products due to adding lots of defoamer. It is used in Semi or full synthetic cutting liquid ad emulsion type cutting liquid. ​

RK-03P is composed of polydimethylsiloxane and inorganic salt. It has outstanding bubble inhibition performance and good acid and alkaline resistance. It is used in sewage treatment, textile auxiliaries and industrial cleaning ​

RK-600P is a non-silicone defoamer grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression ability performances. ​

RK-0010 is a kind of polyether antifoam, which doesn’t contain mineral hydrocarbons. Easy to disperse in water, fast defoaming, foam inhibition persistent. It mainly used in various paper making processes, circulating water treatment industries, power plant desulfurization and landfill leachate, etc., which silicone defoamer is not allowed to use. ​

RK-30C is made by using special modified silicone polyether system. Compared with the traditional defoaming agent, it maintains good stability and high temperature performance in the system. It’s suitable for gear oil, high temperature boiling point distillation, asphalt production , benzene extraction process, transportation and other high temperature solvent foaming systems. ​

RK-10S is a emulsion type polyether modified silicone antifoam, it has good acid&alkali, temperature, shear resistance, and stable in pulp washing black liquid system, no gel formation. Good foam control performance can be achieved by small dosage. Widely used in paper pulp production to prevent the foam issue in the production process, textile auxiliaries, textile dyeing, industrial cleaning, wastewater treatment, etc.​