High Efficiency Dispersant

D107 is a sodium salt polyelectrolyte of synthetic hydrophobic copolymer. It is an extremely versatile pigment dispersant for acrylic, vinyl acrylic, and acrylic/styrene based coatings, and can be expected to give good dispersion, stability, and film properties in a broad array of coating systems. D107, a hydrophobic polymer based carboxylate polyelectrolyte, brings many formulating benefits to coatings applications including very effective with inorganic pigments, superior gloss development, good hiding at economical use levels formaldehyde free and better film formation. ​

D106 is a high efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. It has excellent compatibility with colorants for good color acceptance. ​

RK- 6 3 B is a kind of emulsion type of polyether modified silicone antifoam, compared to the traditional antifoam, it has excellent defoaming and antifoaming performance. It is suitable for gel detergent, textile dyeing and auxiliaries, etc surfactant systems and water treatment. ​

RK-8KD is defoamer emulsion contained silicone oil and hydrophobic particles It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of wastewater treatment, cleaning industry, pesticide industry, etc.. ​

RK-7600 is a polyther(ester) defoamer in paper industry. ​

RK-500P is a polyether ester defoamer, which suitable used in mid-low temperature conditions, it’s widely used in general industrial sewage treatment and RO membrane sewage treatment, landfill leachate, etc. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-20S is a emulsion type polyether modified silicone antifoam, it has good acid&alkali, temperature, shear resistance, and stable in pulp washing black liquid system, no gel formation. Good foam control performance can be achieved by small dosage. Widely used in paper pulp production to prevent the foam issue in the production process, textile auxiliaries, textile dyeing, industrial cleaning, wastewater treatment, etc ​

RK-23S is a kind of silicone defoamer, it has excellent defoaming&antifoaming performance at low dosage. It’s mainly used in textile printing & dyeing and water treatment processes. ​

RK-7670M uses silicone grease system, with special polyether modified silicone emulsion system. It provides excellent antifoaming performance and balance, which make sure the compatibility of system, diluted stability and excellent stability of shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the final products due to adding lots of defoamer. It is used in Semi or full synthetic cutting liquid ad emulsion type cutting liquid. ​

RK-9864 is a special polysiloxane and polyether copolymerization defoamer with special structure of the active synergist. It has strong anti-foaming performance in polyurethane, acrylic emulsion system, wood furniture coatings, architectural coatings, automotive production line coatings, paper coatings, sealant and adhesive, especially suitable for paint mixing phase foam control, with excellent comprehensive performance. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-110S is a highly efficient and multipurpose silicone defoamer with easy use, and good compatibility. Low addition can achieve foam control requirement. This product is oily silicone polyether, which is suitable for non aqueous system. ​

RK-23T is a special modified organosilicon defoamer with excellent defoaming and antifoaming properties, system compatibility, excellent dispersibility. It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-76T has excellent defoaming and anti-foaming properties as well as excellent compatibility, and can effectively prevent microfoam generation in high and low viscosity systems. RK-76T is suitable for water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings and water-based printing inks. ​