Polyacrylamide（PAM）-High Cost-effective Flocculant Agent

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation,It is widely used in water treatment, oilfield, mining, papermaking and other industries. ​

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, They are widely used in water treatment, mining, oilfield, paper and other application industries. ​

Anionic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, It can be used in water treatment, oil field, mining and other industries. ​

RK-900N is a general type silicone polyether defoamer, which is developed by adopting special silicone grease system and polyether with specially designed emulsification system. The silicone grease provide excellent balance. Emulsified system makes sure compatibility, diluted and shear stability. It is applied to foams produced in most aqueous and oily systems and has excellent antifoaming properties. ​

Anionic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, It can be used in water treatment, oil field, mining and other industries. ​

RK-9110S is a defoamer specially designed for various water-based inks and latex systems. It has excellent dynamic defoaming, antifoaming performance, long-lasting defoaming ability, and excellent compatibility. It has the properties of silicon type defoamer and the compatibility of non-silicon type defoamer. It is used in inks, latex paints and coatings, which improves the leveling and wetting of inks, paints and paints, and improves the abrasion resistance and smoothness of paints. ​

RK-7470M is developed with a special silicone grease system, with specially designed emulsion system. It provides excellent antifoaming performance and balance, which makes sure the compatibility of system, excellent stability of dilution and shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the finished products due to adding lots of defoamer. It is used in full synthetic cutting liquid and emulsion type cutting liquid. ​

RK-0056 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-0056 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​

RK-801 is a defoamer specially designed for various water-based inks and latex systems. It has excellent dynamic defoaming, antifoaming performance, long-lasting defoaming ability, and excellent compatibility. It has the properties of silicon type defoamer and the compatibility of non-silicon type defoamer. It is used in inks, latex paints and coatings, which improves the leveling and wetting of inks, paints and paints, and improves the abrasion resistance and smoothness of paints. ​

RK-8777 is a modified silicone defoamer specially designed and developed for latex systems. It has excellent anti-foaming performance and good compatibility.It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​

RK-04P is a kind of high efficiency special powder antifoam . It has excellent defoaming & antifoaming performance. Chemical is stable, not toxic, not corrosive, and not sensitive to acid&alkali. ​

RK-106P is a kind of powder defoamer suitable for washing powder and powder detergent . It has excellent defoaming & antifoaming performance, stable in high temperature temperature and strong alkali environment. ​

RK-800P is a non-silicone defoaming agent grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression abilities. It is mainly used for defoaming of polycarboxylate superplasticizer, landfill leachate and water treatment, concrete, power plant desulfurization etc.. ​

T40 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is a product of APEO and OrganoTin free. ​

RK-63T is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and stability of dilution and shear. It has excellent antifoaming performance and stability, especially in very harsh conditions. It is used in textile dyeing, industrial cleaning, especially high temperature overflow dyeing, shear, extreme pH environment. It has good use safety in some non-silicon use fields ​

T90 to T104 series of rheology modifiers represent the latest advance in synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) technology. T90-T104 series provide customers the opportunity for thickener consolidation with improved performance in architectural and functional coatings. ​