Polyacrylamide（PAM）-High Efficiency Flocculating Agent

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, it can be used in water treatment,oilfield,mining,papermaking,etc. ​

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation,It is widely used in water treatment, oilfield, mining, papermaking and other industries. ​

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, They are widely used in water treatment, mining, oilfield, paper and other application industries. ​

RK-1215A is a silicone defoamer, which is stable in high temperature and shear, acid system, especially the performance of fast defoaming. It’s suitable for textile printing&dyeing, industrial cleaning, metal working liquid, and other high&mid temperature, high shear, and extremely pH environment. ​

D106 is a high efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. It has excellent compatibility with colorants for good color acceptance. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-300P is a modified polyether silicone compound emulsion defoamer. It has good dispersibility in the foaming system. No silicone grease precipitation and flotation. ​

D105 is a high solids and efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. ​

RK-T100 is a kind of defoaming agent with special emulsified and silica system, which hasexcellent dynamic defoaming, anti-foaming effect and long-lasting defoaming ability, especially under the harsh conditions. Very low addition can achieve the ideal defoaming effectand reduce the effect causedby adding largely amount defoamer.The special emulsified system makes the good compatibility, diluted stability and shear stability.​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

T60 is a high solids and nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is APEO and OrganoTin free. ​

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-15S is a silicone defoamer, which is stable in high temperature, high shear and acid system, especially excellent performance of fast defoaming. It’s suitable for textile printing&dyeing, industrial cleaning, metal working liquid, and other typical environment, like high&mid temperature, high shear, and extremely pH . ​

RK-03P is composed of polydimethylsiloxane and inorganic salt. It has outstanding bubble inhibition performance and good acid and alkaline resistance. It is used in sewage treatment, textile auxiliaries and industrial cleaning ​

T10 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural and functional coatings. The product contains no solvent and is a low odor, APEO and OrganoTin free one. ​

RK-600P is a non-silicone defoamer grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression ability performances. ​