A High Efficiency Special Powder Antifoam

RK-03P is composed of polydimethylsiloxane and inorganic salt. It has outstanding bubble inhibition performance and good acid and alkaline resistance. It is used in sewage treatment, textile auxiliaries and industrial cleaning ​

Antifoam RK-02P is a powder defoamer with excellent antifoaming performance in textile industry, water treatment, bottle cleaning and slurry.​

RK-106P is a kind of powder defoamer suitable for washing powder and powder detergent . It has excellent defoaming & antifoaming performance, stable in high temperature temperature and strong alkali environment. ​

RK-104P is a silicone powder defoamer with excellent defoaming performance. It can eliminate foam of water-bearing system. It’s widely used in dry-mixed mortar, powder coating, diatom ooze , and oil drilling etc ​

RK-06P is a kind of powder defoamer suitable for washing powder and powder detergent . It has excellent defoaming & antifoaming performance, stable in high temperature temperature and strong alkali environment. ​

RK-07P is a kind of powder defoamer suitable for foaming environment of macromolecule in water system. It has excellent defoaming & antifoaning performance in aqueous system. Chemical is stable, not toxic, not corrosive, and not sensitive to acid & alkali. ​

RK-7670M uses silicone grease system, with special polyether modified silicone emulsion system. It provides excellent antifoaming performance and balance, which make sure the compatibility of system, diluted stability and excellent stability of shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the final products due to adding lots of defoamer. It is used in Semi or full synthetic cutting liquid ad emulsion type cutting liquid. ​

RK-561 is a modified polyether defoamer. It has excellent antifoaming performance, especially under some very harsh conditions and high shear system. It is used in textile industry, industrial cleaning, water-based ink. ​

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, it can be used in water treatment,oilfield,mining,papermaking,etc. ​

RK-8KD is defoamer emulsion contained silicone oil and hydrophobic particles It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of wastewater treatment, cleaning industry, pesticide industry, etc.. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-100S is a general-purpose 100% silicone-polyether defoamer, which is prepared by a characteristic graft reaction modified silicone polyether with a specially designed emulsification system. The special emulsified system makes sure compatibility, stability of dilution&shear of system. It has excellent antifoam performance, especially in some very harsh conditions. It is used in high temperature of textile and resists to acid & alkali. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-15S is a silicone defoamer, which is stable in high temperature, high shear and acid system, especially excellent performance of fast defoaming. It’s suitable for textile printing&dyeing, industrial cleaning, metal working liquid, and other typical environment, like high&mid temperature, high shear, and extremely pH . ​

RK-0010 is a kind of polyether antifoam, which doesn’t contain mineral hydrocarbons. Easy to disperse in water, fast defoaming, foam inhibition persistent. It mainly used in various paper making processes, circulating water treatment industries, power plant desulfurization and landfill leachate, etc., which silicone defoamer is not allowed to use. ​

RK-T60 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-T60 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​