High Efficiency Powder Antifoaming Agent

RK-03P is composed of polydimethylsiloxane and inorganic salt. It has outstanding bubble inhibition performance and good acid and alkaline resistance. It is used in sewage treatment, textile auxiliaries and industrial cleaning ​

RK-106P is a kind of powder defoamer suitable for washing powder and powder detergent . It has excellent defoaming & antifoaming performance, stable in high temperature temperature and strong alkali environment. ​

RK-04P is a kind of high efficiency special powder antifoam . It has excellent defoaming & antifoaming performance. Chemical is stable, not toxic, not corrosive, and not sensitive to acid&alkali. ​

RK-104P is a silicone powder defoamer with excellent defoaming performance. It can eliminate foam of water-bearing system. It’s widely used in dry-mixed mortar, powder coating, diatom ooze , and oil drilling etc ​

RK-06P is a kind of powder defoamer suitable for washing powder and powder detergent . It has excellent defoaming & antifoaming performance, stable in high temperature temperature and strong alkali environment. ​

RK-07P is a kind of powder defoamer suitable for foaming environment of macromolecule in water system. It has excellent defoaming & antifoaning performance in aqueous system. Chemical is stable, not toxic, not corrosive, and not sensitive to acid & alkali. ​

RK-73T is a modified silicone defoamer specially designed and developed for latex system. It has excellent anti-foam performance and good compatibility. It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-1100 is a special silicone synthetic defoamer suitable for non-aqueous systems. It is a cost-effective product specially designed for film production, with excellent foam suppression performance and stability. A very small amount of addition can achieve the ideal foam control effect. ​

RK-600P is a non-silicone defoamer grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression ability performances. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-8KD is defoamer emulsion contained silicone oil and hydrophobic particles It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of wastewater treatment, cleaning industry, pesticide industry, etc.. ​

RK-7470M is developed with a special silicone grease system, with specially designed emulsion system. It provides excellent antifoaming performance and balance, which makes sure the compatibility of system, excellent stability of dilution and shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the finished products due to adding lots of defoamer. It is used in full synthetic cutting liquid and emulsion type cutting liquid. ​

RK-15S is a silicone defoamer, which is stable in high temperature, high shear and acid system, especially excellent performance of fast defoaming. It’s suitable for textile printing&dyeing, industrial cleaning, metal working liquid, and other typical environment, like high&mid temperature, high shear, and extremely pH . ​

T40 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is a product of APEO and OrganoTin free. ​

RK-66T has excellent defoaming and anti-foaming properties as well as excellent compatibility, and can effectively prevent microfoam generation in high and low viscosity systems. RK-66T is suitable for water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings and water-based printing inks. ​