RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-7600 is a polyther(ester) defoamer in paper industry. ​

Water Decoloring Agent RK-DA01 is a quaternary cationic polymer which is the special product for de-coloring, flocculating, COD crdecreasing and other applications. ​

RK-0036 is a compound antifoam without precipitation after dispersing in the system. ​

RK-600P is a non-silicone defoamer grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression ability performances. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-C140 endows paper or fabric with excellent water, oil and wash resistance, and is suitable for scraping and impregnating processes. It can be used for impregnation and rolling, and also for water-based adhesives on paper or fabrics that require waterproof processing, serving as an internal waterproofing agent. ​

RK-900P is a non-silicone antifoaming agent with hydroxy compound and synergist. It has great performance of foam inhibition persistent, alkali and acid resistance. It can resist high temperature above 100 ℃. It mainly used in alumina refinery bayer process. ​

RK-C120 is an environmentally friendly water and oil proofing agent specifically designed for pulp molded food box, paper and paperboard without changing the feel and appearance significantly enhancing the product's resistance to high-temperature liquid penetration. Its stable formulation facilitates easy demolding and convenient operation during processing. ​

RK-400P is a kind of polyether antifoam, which doesn’t contain mineral hydrocarbons. It’s easy to disperse in water, defoaming fast, good foam inhibition persistent. It mainly used in various power plant desulfurization, paper process and waste water treatment, etc. ​