Polyacrylamide（PAM）-High Efficiency Flocculating Agent

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, it can be used in water treatment,oilfield,mining,papermaking,etc. ​

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation,It is widely used in water treatment, oilfield, mining, papermaking and other industries. ​

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, They are widely used in water treatment, mining, oilfield, paper and other application industries. ​

RK-900N is a general type silicone polyether defoamer, which is developed by adopting special silicone grease system and polyether with specially designed emulsification system. The silicone grease provide excellent balance. Emulsified system makes sure compatibility, diluted and shear stability. It is applied to foams produced in most aqueous and oily systems and has excellent antifoaming properties. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-C120 is an environmentally friendly water and oil proofing agent specifically designed for pulp molded food box, paper and paperboard without changing the feel and appearance significantly enhancing the product's resistance to high-temperature liquid penetration. Its stable formulation facilitates easy demolding and convenient operation during processing. ​

RK-918 is a powerful multi-purpose silicone synthetic defoamer for non-aqueous systems. It is especially suitable for the foam control of oily inks and epoxy floor paint systems for printed circuit boards. It has good defoaming properties and can quickly eliminate small bubbles in the system. ​

RK-10S is a emulsion type polyether modified silicone antifoam, it has good acid&alkali, temperature, shear resistance, and stable in pulp washing black liquid system, no gel formation. Good foam control performance can be achieved by small dosage. Widely used in paper pulp production to prevent the foam issue in the production process, textile auxiliaries, textile dyeing, industrial cleaning, wastewater treatment, etc.​

RK-P582 silicone defoamer emulsion is an emulsion type polyether modified silicone defoamer, which has excellent resistance to strong alkali&acid, temperature and shearing. It has good stability in pulping black liquor system and no gel formation. Good foam control performance can be achieved by small addition. It is widely used in the control of foam generation in pulping black liquor system, as well as in industrial cleaning, sewage treatment and other industries. ​

RK-C140 endows paper or fabric with excellent water, oil and wash resistance, and is suitable for scraping and impregnating processes. It can be used for impregnation and rolling, and also for water-based adhesives on paper or fabrics that require waterproof processing, serving as an internal waterproofing agent. ​

T80 is a high solids and nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is APEO and OrganoTin free. ​

RK-0036 is a compound antifoam without precipitation after dispersing in the system. ​

RK-23S is a kind of silicone defoamer, it has excellent defoaming&antifoaming performance at low dosage. It’s mainly used in textile printing & dyeing and water treatment processes. ​

RK-23T is a special modified organosilicon defoamer with excellent defoaming and antifoaming properties, system compatibility, excellent dispersibility. It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​

RK-20S is a emulsion type polyether modified silicone antifoam, it has good acid&alkali, temperature, shear resistance, and stable in pulp washing black liquid system, no gel formation. Good foam control performance can be achieved by small dosage. Widely used in paper pulp production to prevent the foam issue in the production process, textile auxiliaries, textile dyeing, industrial cleaning, wastewater treatment, etc ​

T90 to T104 series of rheology modifiers represent the latest advance in synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) technology. T90-T104 series provide customers the opportunity for thickener consolidation with improved performance in architectural and functional coatings. ​