An Defoamer with excellent antifoaming performance

RK-300P is a modified polyether silicone compound emulsion defoamer. It has good dispersibility in the foaming system. No silicone grease precipitation and flotation. ​

RK-0036 is a compound antifoam without precipitation after dispersing in the system. ​

RK-561 is a modified polyether defoamer. It has excellent antifoaming performance, especially under some very harsh conditions and high shear system. It is used in textile industry, industrial cleaning, water-based ink. ​

RK-T60 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-T60 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​

RK-900N is a general type silicone polyether defoamer, which is developed by adopting special silicone grease system and polyether with specially designed emulsification system. The silicone grease provide excellent balance. Emulsified system makes sure compatibility, diluted and shear stability. It is applied to foams produced in most aqueous and oily systems and has excellent antifoaming properties. ​

RK-857 is a polysiloxane and polyether copolymerization defoamer with special structure of the active synergist.The special structure ensures that the compatibility of the system is unchanged and the performance is greatly improved.  It has strong antifoaming performance in water based flexo ink, water acrylic overprinting, pure acrylic emulsion, PVA, polyurethane emulsion  especially during grinding and paint mixing. ​

RK-0056 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-0056 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​

RK-T100is akind of defoaming agentwith special emulsified and silica system, which hasexcellent dynamic defoaming, anti-foaming effect and long-lasting defoaming ability, especially under the harsh conditions. Very low addition can achieve the ideal defoaming effectand reduce the effect causedby adding largely amount defoamer.The special emulsified system makes the good compatibility, diluted stability and shear stability.​

RK-7515M is made of a special silicone grease system , which is developed in conjunction with aspecially designed polyether modified silicone emulsifying system.The new silicone grease system provides excellent balance of antifoaminng properties. The special emulsifying system ensures compatibility, dilution stability and excellent shear stability of system.Small addition can achieve the optimize result. It has very excellent foam control performance which is suitable for full synthetic metal cutting liquid, semi-synthetic metal liquid and emulsified oil system. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-400S is a silicone antifoam, which is prepared by composite emulsification of silicon emulsifier and hydrocarbon emulsifier based on crosslinked polysiloxane as defoaming active component. It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of wastewater treatment, cleaning industry, oil field chemical industry, etc. ​

RK-0080 is a polyether ester defoamer, with excellent degassing&defoaming&antifoaming performances in high temperature paper making white water. ​

RK-600P is a non-silicone defoamer grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression ability performances. ​

RK-23S is a kind of silicone defoamer, it has excellent defoaming&antifoaming performance at low dosage. It’s mainly used in textile printing & dyeing and water treatment processes. ​

RK-5 D S is a emulsion type polyether modified silicone antifoam, it has good acid&alkali, temperature, shear resistance, and stable in pulp washing black liquid system, no gel formation. Good foam control performance can be achieved by small dosage. Widely used in paper pulp production to prevent the foam issue in the production process, textile auxiliaries, textile dyeing, industrial cleaning, wastewater treatment, etc. ​

RK-35T is non silicone defoamer which is made of special hydroxyl compounds and refined active components. It’s mainly used in non silicone system of high temperature and strong acid, such as wet phosphoric acid. ​