High Antifoaming Defoamer Compound

RK-300P is a modified polyether silicone compound emulsion defoamer. It has good dispersibility in the foaming system. No silicone grease precipitation and flotation. ​

RK-63T is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and stability of dilution and shear. It has excellent antifoaming performance and stability, especially in very harsh conditions. It is used in textile dyeing, industrial cleaning, especially high temperature overflow dyeing, shear, extreme pH environment. It has good use safety in some non-silicon use fields ​

RK-561 is a modified polyether defoamer. It has excellent antifoaming performance, especially under some very harsh conditions and high shear system. It is used in textile industry, industrial cleaning, water-based ink. ​

RK-T60 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-T60 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​

RK-900N is a general type silicone polyether defoamer, which is developed by adopting special silicone grease system and polyether with specially designed emulsification system. The silicone grease provide excellent balance. Emulsified system makes sure compatibility, diluted and shear stability. It is applied to foams produced in most aqueous and oily systems and has excellent antifoaming properties. ​

RK-857 is a polysiloxane and polyether copolymerization defoamer with special structure of the active synergist.The special structure ensures that the compatibility of the system is unchanged and the performance is greatly improved.  It has strong antifoaming performance in water based flexo ink, water acrylic overprinting, pure acrylic emulsion, PVA, polyurethane emulsion  especially during grinding and paint mixing. ​

RK-0056 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-0056 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​

RK-T100is akind of defoaming agentwith special emulsified and silica system, which hasexcellent dynamic defoaming, anti-foaming effect and long-lasting defoaming ability, especially under the harsh conditions. Very low addition can achieve the ideal defoaming effectand reduce the effect causedby adding largely amount defoamer.The special emulsified system makes the good compatibility, diluted stability and shear stability.​

RK-83S is a emulsion type polyether modified organic antifoam. Compared to traditional defoamer, it is stable under strong acid, high temperature, high shear system. It has good defoaming & antifoaming performance, and safe to use. RK-83S is suitable used in the pesticide industry, textile printing&dyeing production processes, especially in high temperature overflow dyeing processes. It can also used in other typical high temperature, high shear, extreme pH environments. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

Antifoam RK-02P is a powder defoamer with excellent antifoaming performance in textile industry, water treatment, bottle cleaning and slurry.​

RK-T100is akind of defoaming agentwith special emulsified and silica system, which hasexcellent dynamic defoaming, anti-foaming effect and long-lasting defoaming ability, especially under the harsh conditions. Very low addition can achieve the ideal defoaming effectand reduce the effect causedby adding largely amount defoamer.The special emulsified system makes the good compatibility, diluted stability and shear stability.​

RK-30N is a kind of emulsion type polyether modified silicone antifoam. Compared to traditional antifoam, it shows very good stability in the system, and good performance at high temperature. It is suitable for the internal added of textile auxiliary, such as refining agent, and internal application of daily washing liquid. ​

RK-8636 is a modified silicone antifoam which is prepared by emulsification of modified polysiloxane and modified polyether in a special process. It has fast defoaming and long antifoaming persistence performance. It’s widely used in industrial cleaning, all kinds of sewage treatment and textile printing, etc. ​

RK-7515M is made of a special silicone grease system , which is developed in conjunction with aspecially designed polyether modified silicone emulsifying system.The new silicone grease system provides excellent balance of antifoaminng properties. The special emulsifying system ensures compatibility, dilution stability and excellent shear stability of system.Small addition can achieve the optimize result. It has very excellent foam control performance which is suitable for full synthetic metal cutting liquid, semi-synthetic metal liquid and emulsified oil system. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​