High Temperature Antifoam For Paper

RK-F0080 is a non-silicone defoaming agent prepared from special high-grade fatty alcohols as the main active substance through special emulsification, which is mainly used in eliminating and control foam in the paper machine and paper making waste water treatment industries. ​

RK-F0020 is a silicone free defoaming agent prepared from special high-grade fatty alcohols as the main active substance through special emulsification, which is mainly used in degassing and control foam in the paper machine and paper making waste water treatment industries and fermentation. ​

D105 is a high solids and efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. ​

Water Decoloring Agent RK-DA01 is a quaternary cationic polymer which is the special product for de-coloring, flocculating, COD crdecreasing and other applications. ​

RK-2200 is a general and special modified non-silicon defoamer, especially suitable for polyurethane, epoxy floor paint, solvent-free UV curing, polyester system, etc. It has excellent defoaming and antifoaming performance, balanced dispersibility and extremely high compatibility, and will not precipitate in the system and form shrinkage holes. ​

RK-0036 is a compound antifoam without precipitation after dispersing in the system. ​

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, it can be used in water treatment,oilfield,mining,papermaking,etc. ​

RK-0080 is a polyether ester defoamer, with excellent degassing&defoaming&antifoaming performances in high temperature paper making white water. ​

RK-50P is a mid-low temperature polyether ester defoamer, suitable for using in paper-making industry and water treatment. ​

T30 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural and functional coatings. T30 is a low odor, solvent, APEO and OrganoTin free product. ​

RK-35T is non silicone defoamer which is made of special hydroxyl compounds and refined active components. It’s mainly used in non silicone system of high temperature and strong acid, such as wet phosphoric acid. ​

RK-400S is a silicone antifoam, which is prepared by composite emulsification of silicon emulsifier and hydrocarbon emulsifier based on crosslinked polysiloxane as defoaming active component. It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of wastewater treatment, cleaning industry, oil field chemical industry, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-03P is composed of polydimethylsiloxane and inorganic salt. It has outstanding bubble inhibition performance and good acid and alkaline resistance. It is used in sewage treatment, textile auxiliaries and industrial cleaning ​

Antifoam RK-02P is a powder defoamer with excellent antifoaming performance in textile industry, water treatment, bottle cleaning and slurry.​

RK-63T is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and stability of dilution and shear. It has excellent antifoaming performance and stability, especially in very harsh conditions. It is used in textile dyeing, industrial cleaning, especially high temperature overflow dyeing, shear, extreme pH environment. It has good use safety in some non-silicon use fields ​