High Efficiency Fatty Alcohol Antifoam

RK-F0090 is a non-silicone defoamer prepared from high-grade fatty alcohols as the main active substance through a special emulsification process, which are mainly used in eliminating and control foam in the paper machine system. No negative impact on the paper making process. ​

RK-F0020 is a silicone free defoaming agent prepared from special high-grade fatty alcohols as the main active substance through special emulsification, which is mainly used in degassing and control foam in the paper machine and paper making waste water treatment industries and fermentation. ​

RK-561 is a modified polyether defoamer. It has excellent antifoaming performance, especially under some very harsh conditions and high shear system. It is used in textile industry, industrial cleaning, water-based ink. ​

RK-106P is a kind of powder defoamer suitable for washing powder and powder detergent . It has excellent defoaming & antifoaming performance, stable in high temperature temperature and strong alkali environment. ​

RK-35T is non silicone defoamer which is made of special hydroxyl compounds and refined active components. It’s mainly used in non silicone system of high temperature and strong acid, such as wet phosphoric acid. ​

RK-600P is a non-silicone defoamer grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression ability performances. ​

RK-500P is a polyether ester defoamer, which suitable used in mid-low temperature conditions, it’s widely used in general industrial sewage treatment and RO membrane sewage treatment, landfill leachate, etc. ​

RK-833S is a silicone free defoamer with good dispersibility in the foaming system, excellent defoaming&antifoaming performances, good compatibility with the used system. It’s mainly used in paper process, electroplating cleaning, RO membrane water treatment, circulating cooling water, landfill leachate, which the silicone defoamer can not be used. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-50P is a mid-low temperature polyether ester defoamer, suitable for using in paper-making industry and water treatment. ​

RK-7670M uses silicone grease system, with special polyether modified silicone emulsion system. It provides excellent antifoaming performance and balance, which make sure the compatibility of system, diluted stability and excellent stability of shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the final products due to adding lots of defoamer. It is used in Semi or full synthetic cutting liquid ad emulsion type cutting liquid. ​

RK-0056 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-0056 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​

RK-800P is a non-silicone defoaming agent grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression abilities. It is mainly used for defoaming of polycarboxylate superplasticizer, landfill leachate and water treatment, concrete, power plant desulfurization etc.. ​

RK-360 is a silicone polyether modified antifoam without precipitation after dispersing in the system. ​

RK-1215A is a silicone defoamer, which is stable in high temperature and shear, acid system, especially the performance of fast defoaming. It’s suitable for textile printing&dyeing, industrial cleaning, metal working liquid, and other high&mid temperature, high shear, and extremely pH environment. ​

RK-03P is a kind of powder defoamer suitable for foaming environment of macromolecule in water system. It has excellent defoaming & antifoaning performance, stable in high temperature and strong alkali environment. It’s widely used in aqueous foaming system control. Chemical is stable, not toxic, not corrosive, and not sensitive to acid&alkali, it is suitable for use in textile sizing temperature range of 70-130 ℃. ​