Water Based Defoaming Agent

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-5 D S is a emulsion type polyether modified silicone antifoam, it has good acid&alkali, temperature, shear resistance, and stable in pulp washing black liquid system, no gel formation. Good foam control performance can be achieved by small dosage. Widely used in paper pulp production to prevent the foam issue in the production process, textile auxiliaries, textile dyeing, industrial cleaning, wastewater treatment, etc. ​

The fluorine-free water-based weak cationic non-fluorine oil repellent agent RK-C004 has an oil repellent temperature range of 5-60℃. It has strong fiber bonding ability, thereby endowing paperboard molded fiber products with excellent oil repellent properties. ​

RK-T60 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-T60 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​

RK-250 is a kind of emulsion polyether modified organic antifoam which is special for aqueous foam system. It’s easy to disperse in water. In wide PH and temperature, small quantities can achieve defoaming performance. ​

RK-9860 has excellent foam suppression performance and stability. Suitable for pure acrylic emulsion, styrene acrylic emulsion, PU dispersion system, used in wood furniture paint, architectural paint, flexo printing and gravure ink, pigment concentrate. Especially suitable for resin grinding or non-resin grinding stage, and has very good compatibility. ​

RK-2200 is a general and special modified non-silicon defoamer, especially suitable for polyurethane, epoxy floor paint, solvent-free UV curing, polyester system, etc. It has excellent defoaming and antifoaming performance, balanced dispersibility and extremely high compatibility, and will not precipitate in the system and form shrinkage holes. ​

RK-8636 is a modified silicone antifoam which is prepared by emulsification of modified polysiloxane and modified polyether in a special process. It has fast defoaming and long antifoaming persistence performance. It’s widely used in industrial cleaning, all kinds of sewage treatment and textile printing, etc. ​

RK-35T is non silicone defoamer which is made of special hydroxyl compounds and refined active components. It’s mainly used in non silicone system of high temperature and strong acid, such as wet phosphoric acid. ​

RK-23S is a kind of silicone defoamer, it has excellent defoaming&antifoaming performance at low dosage. It’s mainly used in textile printing & dyeing and water treatment processes. ​