Monomer For Coatings

M108 is a specialty monomer. It can be incorporated into all-acrylic, vinyl-acrylic and styrene-acrylic emulsion copolymer binders for coatings to provide outstanding wet adhesion and improved scrub resistance. M108 contains mainly cyclic heteroalkyl methacrylate and is a high performance ureido based adhesion promoting monomer. ​

RK-33S is a compound antifoaming agent. Under widely pH and temperature conditions, it has great performances with breaking foam fast and continuously. It’s suitable for areas with higher requirements of compatibility and transparency. And it’s widely used in daily chemical washing, laundry detergent, metal cutting liquid, textile, industrial cleaning, etc. ​

RK-76T has excellent defoaming and anti-foaming properties as well as excellent compatibility, and can effectively prevent microfoam generation in high and low viscosity systems. RK-76T is suitable for water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings and water-based printing inks. ​

T30 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural and functional coatings. T30 is a low odor, solvent, APEO and OrganoTin free product. ​

RK-0036 is a compound antifoam without precipitation after dispersing in the system. ​

RK-23S is a kind of silicone defoamer, it has excellent defoaming&antifoaming performance at low dosage. It’s mainly used in textile printing & dyeing and water treatment processes. ​

T90 to T104 series of rheology modifiers represent the latest advance in synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) technology. T90-T104 series provide customers the opportunity for thickener consolidation with improved performance in architectural and functional coatings. ​

T70 is a high solids and nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is APEO and OrganoTin free. ​

RK-8865 is a modified silicone defoamer that has both the performance of silicone and the compatibility of non-silicone defoamers. It is widely used in water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings, and overprint varnishes. ​

RK-104P is a silicone powder defoamer with excellent defoaming performance. It can eliminate foam of water-bearing system. It’s widely used in dry-mixed mortar, powder coating, diatom ooze , and oil drilling etc ​

T80 is a high solids and nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is APEO and OrganoTin free. ​

RK-30C is made by using special modified silicone polyether system. Compared with the traditional defoaming agent, it maintains good stability and high temperature performance in the system. It’s suitable for gear oil, high temperature boiling point distillation, asphalt production , benzene extraction process, transportation and other high temperature solvent foaming systems. ​

RK-561 is a modified polyether defoamer. It has excellent antifoaming performance, especially under some very harsh conditions and high shear system. It is used in textile industry, industrial cleaning, water-based ink. ​

RK-7470M is developed with a special silicone grease system, with specially designed emulsion system. It provides excellent antifoaming performance and balance, which makes sure the compatibility of system, excellent stability of dilution and shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the finished products due to adding lots of defoamer. It is used in full synthetic cutting liquid and emulsion type cutting liquid. ​

RK-012B is a 100% active defoamer, which has good defoaming properties against styrene/acrylic acid, pure acrylic emulsion, PVA, and water-based epoxy. It is especially suitable for addition during the grinding process of water-based color paste. ​

RK-0080 is a polyether ester defoamer, with excellent degassing&defoaming&antifoaming performances in high temperature paper making white water. ​