Polyacrylamide（PAM）-High Cost-effective Flocculant Agent

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation,It is widely used in water treatment, oilfield, mining, papermaking and other industries. ​

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, They are widely used in water treatment, mining, oilfield, paper and other application industries. ​

Anionic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, It can be used in water treatment, oil field, mining and other industries. ​

RK-110S is a highly efficient and multipurpose silicone defoamer with easy use, and good compatibility. Low addition can achieve foam control requirement. This product is oily silicone polyether, which is suitable for non aqueous system. ​

RK-F0020 is a silicone free defoaming agent prepared from special high-grade fatty alcohols as the main active substance through special emulsification, which is mainly used in degassing and control foam in the paper machine and paper making waste water treatment industries and fermentation. ​

T90 to T104 series of rheology modifiers represent the latest advance in synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) technology. T90-T104 series provide customers the opportunity for thickener consolidation with improved performance in architectural and functional coatings. ​

RK-06P is a kind of powder defoamer suitable for washing powder and powder detergent . It has excellent defoaming & antifoaming performance, stable in high temperature temperature and strong alkali environment. ​

RK-7470M is developed with a special silicone grease system, with specially designed emulsion system. It provides excellent antifoaming performance and balance, which makes sure the compatibility of system, excellent stability of dilution and shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the finished products due to adding lots of defoamer. It is used in full synthetic cutting liquid and emulsion type cutting liquid. ​

RK-701M is developed with a special silicone grease system and a specially designed polyether emulsification system. New silicone grease system provides excellent defoaming&antifoaming performance and balance. The special emuksification system makes sure compatibility of system, diluted stability and excellent stability of shear. It’s suitable for metal cutting liquid. Little addition can achieve foam control effect and reduce the negative effect on the finished products due to adding lots of defoamer. It is used in full synthetic cutting liquid and semi synthetic cutting liquid. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

T40 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is a product of APEO and OrganoTin free. ​

RK-83S is a emulsion type polyether modified organic antifoam. Compared to traditional defoamer, it is stable under strong acid, high temperature, high shear system. It has good defoaming & antifoaming performance, and safe to use. RK-83S is suitable used in the pesticide industry, textile printing&dyeing production processes, especially in high temperature overflow dyeing processes. It can also used in other typical high temperature, high shear, extreme pH environments. ​

RK-1100 is a special silicone synthetic defoamer suitable for non-aqueous systems. It is a cost-effective product specially designed for film production, with excellent foam suppression performance and stability. A very small amount of addition can achieve the ideal foam control effect. ​

RK-250 is a kind of emulsion polyether modified organic antifoam which is special for aqueous foam system. It’s easy to disperse in water. In wide PH and temperature, small quantities can achieve defoaming performance. ​

RK-76T has excellent defoaming and anti-foaming properties as well as excellent compatibility, and can effectively prevent microfoam generation in high and low viscosity systems. RK-76T is suitable for water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings and water-based printing inks. ​

RK- 6 3 B is a kind of emulsion type of polyether modified silicone antifoam, compared to the traditional antifoam, it has excellent defoaming and antifoaming performance. It is suitable for gel detergent, textile dyeing and auxiliaries, etc surfactant systems and water treatment. ​