Water Based Defoaming Agent

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

Anionic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, It can be used in water treatment, oil field, mining and other industries. ​

RK-918 is a powerful multi-purpose silicone synthetic defoamer for non-aqueous systems. It is especially suitable for the foam control of oily inks and epoxy floor paint systems for printed circuit boards. It has good defoaming properties and can quickly eliminate small bubbles in the system. ​

RK-23T is a special modified organosilicon defoamer with excellent defoaming and antifoaming properties, system compatibility, excellent dispersibility. It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​

RK-26T is a special modified polyether defoamer with excellent defoaming, foam inhibition and system compatibility. It is widely used in water-based systems for emulsion polymerisation, colour paste grinding, adhesives, plastic paints, industrial paints, wood furniture coatings, automotive production line coatings, architectural coatings, paper coatings, printing inks, etc. ​

M109 is a specialty monomer of wet adhesion promoter in methyl methacrylate. It can be incorporated during polymerization of solvent based resin synthesis, as well as of water based all-acrylic, vinyl- acrylic and styrene-acrylic emulsion copolymer binders for coatings, to provide outstanding wet adhesion and improved scrub resistance. M109 contains mainly cyclic heteroalkyl methacrylate and is a high performance ureido based adhesion promoting monomer. ​

D105 is a high solids and efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. ​

T90 to T104 series of rheology modifiers represent the latest advance in synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) technology. T90-T104 series provide customers the opportunity for thickener consolidation with improved performance in architectural and functional coatings. ​

RK-10S is a emulsion type polyether modified silicone antifoam, it has good acid&alkali, temperature, shear resistance, and stable in pulp washing black liquid system, no gel formation. Good foam control performance can be achieved by small dosage. Widely used in paper pulp production to prevent the foam issue in the production process, textile auxiliaries, textile dyeing, industrial cleaning, wastewater treatment, etc.​

RK-8876 is a defoamer developed by copolymerizing polysiloxane polyether with a special structural active synergist. This product has excellent anti foaming performance and stability. The special structure ensures that the compatibility of the system is unchanged and the performance is greatly improved. It has strong antifoaming and foam inhibition performance in waterborne epoxy, pure acrylic lotion, PVA, polyurethane lotion, especially during grinding and paint mixing ​