Mineral Oil Defoamer For Coatings

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-883S is a silicone free defoamer with good dispersibility in the foaming system, excellent defoaming&antifoaming performances, good compatibility with the used system. It’s mainly used in paper process, electroplating cleaning, RO membrane water treatment, circulating cooling water, landfill leachate, which the silicone defoamer can not be used. ​

T80 is a high solids and nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is APEO and OrganoTin free. ​

RK-900N is a general type silicone polyether defoamer, which is developed by adopting special silicone grease system and polyether with specially designed emulsification system. The silicone grease provide excellent balance. Emulsified system makes sure compatibility, diluted and shear stability. It is applied to foams produced in most aqueous and oily systems and has excellent antifoaming properties. ​

RK-0056 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-0056 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​

T60 is a high solids and nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is APEO and OrganoTin free. ​

Anionic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, It can be used in water treatment, oil field, mining and other industries. ​

T90 to T104 series of rheology modifiers represent the latest advance in synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) technology. T90-T104 series provide customers the opportunity for thickener consolidation with improved performance in architectural and functional coatings. ​

RK-23S is a kind of silicone defoamer, it has excellent defoaming&antifoaming performance at low dosage. It’s mainly used in textile printing & dyeing and water treatment processes. ​

RK-73T is a modified silicone defoamer specially designed and developed for latex system. It has excellent anti-foam performance and good compatibility. It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​