Mineral Oil-based Defoamer

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

M108 is a specialty monomer. It can be incorporated into all-acrylic, vinyl-acrylic and styrene-acrylic emulsion copolymer binders for coatings to provide outstanding wet adhesion and improved scrub resistance. M108 contains mainly cyclic heteroalkyl methacrylate and is a high performance ureido based adhesion promoting monomer. ​

RK-8455S is a silicone antifoam, which is prepared by composite emulsification of silicon emulsifier and hydrocarbon emulsifier based on crosslinked polysiloxane as defoaming active component. It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of pulp washing black liquid , wastewater treatment, cleaning industry, oil field chemical industry, etc. ​

RK-04P is a kind of high efficiency special powder antifoam . It has excellent defoaming & antifoaming performance. Chemical is stable, not toxic, not corrosive, and not sensitive to acid&alkali. ​

RK-0056 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-0056 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​

T20 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural and functional coatings. The product contains no solvent and is a low odor, APEO and OrganoTin free one. ​

RK-8876 is a defoamer developed by copolymerizing polysiloxane polyether with a special structural active synergist. This product has excellent anti foaming performance and stability. The special structure ensures that the compatibility of the system is unchanged and the performance is greatly improved. It has strong antifoaming and foam inhibition performance in waterborne epoxy, pure acrylic lotion, PVA, polyurethane lotion, especially during grinding and paint mixing ​

Antifoam RK-02P is a powder defoamer with excellent antifoaming performance in textile industry, water treatment, bottle cleaning and slurry.​

RK-15S is a silicone defoamer, which is stable in high temperature, high shear and acid system, especially excellent performance of fast defoaming. It’s suitable for textile printing&dyeing, industrial cleaning, metal working liquid, and other typical environment, like high&mid temperature, high shear, and extremely pH . ​

RK-23T is a special modified organosilicon defoamer with excellent defoaming and antifoaming properties, system compatibility, excellent dispersibility. It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​