High Cost-Effective Mineral Oil Defoamer Antifoam

High Cost-Effective Mineral Oil Defoamer

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil.

Item NO.:
RK-707
Payment:
T/T; L/C at sight; DAP
Product Origin:
China
Color:
Light yellow opaque liquid
Lead Time:
≤7 days

inquiry now

High Cost-Effective Mineral Oil Defoamer Use

Styrene acrylic emulsion, Silicone acrylic emaulsion, acrylic emulsion, vinegar butyl acrylate emaulsion etc coating system

Waterborne latex (styrene/butadiene, acrylic acid, polyvinyl chloride and its copolymer, vinyl acetate, dichloroethylene and water-soluble alkyd)

Water based adhesives and latex paints

Thick slurry and high viscosity system

Elastic wool drawing, floor paint, leather edge oil system

Product property:

High efficiency in adhesive and coating systems

Suitable for waterborne formulation

Good performances in leather edge oil system

Break foam fast and foam control for a long time

Low addition, cost-effective

Main physical and chemical properties:

Appearance:Light yellow opaque liquid

Viscosity (25°C) :1500~8000mPa ·s

Active content:100%

pH :5.5-7.0

Application Process：

Defoamer consists of hydrophobic liquid and hydrophobic particles. It is recommended that the user should fully stir before using, even if the surface is not stratified; long-term storage may be slightly stratified, evenly mixed and used, without affecting the effect.

The additive amount is 0.2-0.6% of coating weight, added 1.0-1.5‰ at pulping process, added 1.0-1.5‰ again at paint correction. The optimum addition should be depended on specific situation. Do not dilute. If diluted with water, the antifoaming performance will be destroyed.

High Cost-Effective Mineral Oil Defoamer

Click to download related documents:Antifoam RK-707

Tags :

inquiry now

Related Products

RK-170 High Efficiency Mineral Oil Antifoam

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect.

Durability-Effective Mineral Oil Antifoam

RK-1107 Durability-Effective Defoaming Agent

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating.

RK-207 Water Based Defoaming Agent

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface.

RK-203 Mineral Oil-based Defoamer

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc.

High Compatibility Defoamer for Latex Paint

RK-980P Good compatibility Defoamer

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment.

High Compatibility Defoamer for Coatings

RK-40S Good system compatibility Defoamer

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles.

RK-170A Mineral Oil Defoamer For Coatings

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect.

High Efficiency Pigment Dispersant for Coatings

D-106 High Cost-effectiveness Dispersant

D106 is a high efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. It has excellent compatibility with colorants for good color acceptance.

RK-106P Silicone Antifoaming Agent For Powder Detergent

RK-106P is a kind of powder defoamer suitable for washing powder and powder detergent . It has excellent defoaming & antifoaming performance, stable in high temperature temperature and strong alkali environment.

RK-50P Highly Efficient Polyether Ester Antifoam

RK-50P is a mid-low temperature polyether ester defoamer, suitable for using in paper-making industry and water treatment.

RK-900N Silicone Based Defoamer

RK-900N is a general type silicone polyether defoamer, which is developed by adopting special silicone grease system and polyether with specially designed emulsification system. The silicone grease provide excellent balance. Emulsified system makes sure compatibility, diluted and shear stability. It is applied to foams produced in most aqueous and oily systems and has excellent antifoaming properties.

RK-400S Silicone Defoaming Emulsion

RK-400S is a silicone antifoam, which is prepared by composite emulsification of silicon emulsifier and hydrocarbon emulsifier based on crosslinked polysiloxane as defoaming active component. It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of wastewater treatment, cleaning industry, oil field chemical industry, etc.

High-Performance Defoamer for Printing Ink

RK-9855 Excellent defoaming ability Defoamer

RK-9855 is a defoaming product with outstanding defoaming ability, wide application range and excellent compatibility. It is widely used in a variety of latex systems.

High system compatibility Defoamer for Coatings

RK-66T High system compatibility Defoamer

RK-66T has excellent defoaming and anti-foaming properties as well as excellent compatibility, and can effectively prevent microfoam generation in high and low viscosity systems. RK-66T is suitable for water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings and water-based printing inks.

RK-P582 Pulp Washing Black Liquor Antifoam

RK-P582 silicone defoamer emulsion is an emulsion type polyether modified silicone defoamer, which has excellent resistance to strong alkali&acid, temperature and shearing. It has good stability in pulping black liquor system and no gel formation. Good foam control performance can be achieved by small addition. It is widely used in the control of foam generation in pulping black liquor system, as well as in industrial cleaning, sewage treatment and other industries.

RK-30C Excellent Stability Water-Based Defoamer

RK-30C is made by using special modified silicone polyether system. Compared with the traditional defoaming agent, it maintains good stability and high temperature performance in the system. It’s suitable for gear oil, high temperature boiling point distillation, asphalt production , benzene extraction process, transportation and other high temperature solvent foaming systems.

What are you looking for?

Use smart search to quickly find what you need.

Suggested :

Silicone antifoam Fatty alcohol antifoam Polyether antifoam Antifoam compound Powder antifoam Mineral oil antifoam Other antifoam Paper Deinking Agent Rheology Modifiers：Rheology Control Additives Industrial Dispersing Agents Specialty monomer for coating Polyacrylamide（PAM）

Click Here To Leave A Message

Leave A Message

inquiry now

Looking for News?

Our hours

Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)

Home

Products

contact