Water Based Defoaming Agent

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-8777 is a modified silicone defoamer specially designed and developed for latex systems. It has excellent anti-foaming performance and good compatibility.It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​

RK-C140 endows paper or fabric with excellent water, oil and wash resistance, and is suitable for scraping and impregnating processes. It can be used for impregnation and rolling, and also for water-based adhesives on paper or fabrics that require waterproof processing, serving as an internal waterproofing agent. ​

RK-100S is a general-purpose 100% silicone-polyether defoamer, which is prepared by a characteristic graft reaction modified silicone polyether with a specially designed emulsification system. The special emulsified system makes sure compatibility, stability of dilution&shear of system. It has excellent antifoam performance, especially in some very harsh conditions. It is used in high temperature of textile and resists to acid & alkali. ​

RK-63T is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and stability of dilution and shear. It has excellent antifoaming performance and stability, especially in very harsh conditions. It is used in textile dyeing, industrial cleaning, especially high temperature overflow dyeing, shear, extreme pH environment. It has good use safety in some non-silicon use fields ​

RK-600P is a non-silicone defoamer grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression ability performances. ​

Antifoam RK-02P is a powder defoamer with excellent antifoaming performance in textile industry, water treatment, bottle cleaning and slurry.​

T10 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural and functional coatings. The product contains no solvent and is a low odor, APEO and OrganoTin free one. ​

RK-7515M silicone antifoam is made of a special silicone grease system , which is developed in conjunction with aspecially designed polyether modified silicone emulsifying system.The new silicone grease system provides excellent balance of antifoaminng properties. The special emulsifying system ensures compatibility, dilution stability and excellent shear stability of system.Small addition can achieve the optimize result. It has very excellent foam control performance which is suitable for full synthetic metal cutting liquid, semi-synthetic metal liquid and emulsified oil system. ​

RK-883S is a silicone free defoamer with good dispersibility in the foaming system, excellent defoaming&antifoaming performances, good compatibility with the used system. It’s mainly used in paper process, electroplating cleaning, RO membrane water treatment, circulating cooling water, landfill leachate, which the silicone defoamer can not be used. ​