Efficient Antifoaming Agent Emulsion

RK-35T is non silicone defoamer which is made of special hydroxyl compounds and refined active components. It’s mainly used in non silicone system of high temperature and strong acid, such as wet phosphoric acid. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-8KD is defoamer emulsion contained silicone oil and hydrophobic particles It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of wastewater treatment, cleaning industry, pesticide industry, etc.. ​

D105 is a high solids and efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

T10 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural and functional coatings. The product contains no solvent and is a low odor, APEO and OrganoTin free one. ​

D107 is a sodium salt polyelectrolyte of synthetic hydrophobic copolymer. It is an extremely versatile pigment dispersant for acrylic, vinyl acrylic, and acrylic/styrene based coatings, and can be expected to give good dispersion, stability, and film properties in a broad array of coating systems. D107, a hydrophobic polymer based carboxylate polyelectrolyte, brings many formulating benefits to coatings applications including very effective with inorganic pigments, superior gloss development, good hiding at economical use levels formaldehyde free and better film formation. ​

T90 to T104 series of rheology modifiers represent the latest advance in synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) technology. T90-T104 series provide customers the opportunity for thickener consolidation with improved performance in architectural and functional coatings. ​

Antifoam RK-02P is a powder defoamer with excellent antifoaming performance in textile industry, water treatment, bottle cleaning and slurry.​

RK-66T has excellent defoaming and anti-foaming properties as well as excellent compatibility, and can effectively prevent microfoam generation in high and low viscosity systems. RK-66T is suitable for water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings and water-based printing inks. ​

RK-8876 is a defoamer developed by copolymerizing polysiloxane polyether with a special structural active synergist. This product has excellent anti foaming performance and stability. The special structure ensures that the compatibility of the system is unchanged and the performance is greatly improved. It has strong antifoaming and foam inhibition performance in waterborne epoxy, pure acrylic lotion, PVA, polyurethane lotion, especially during grinding and paint mixing ​

RK-76T has excellent defoaming and anti-foaming properties as well as excellent compatibility, and can effectively prevent microfoam generation in high and low viscosity systems. RK-76T is suitable for water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings and water-based printing inks. ​

RK- 6 3 B is a kind of emulsion type of polyether modified silicone antifoam, compared to the traditional antifoam, it has excellent defoaming and antifoaming performance. It is suitable for gel detergent, textile dyeing and auxiliaries, etc surfactant systems and water treatment. ​

RK-8680 is a highly efficient and multi-purpose organic silicon synthetic defoamer suitable for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. Due to its excellent comprehensive performance, the amount added in most systems is significantly less than other types of defoamers. ​

RK-9864 is a special polysiloxane and polyether copolymerization defoamer with special structure of the active synergist. It has strong anti-foaming performance in polyurethane, acrylic emulsion system, wood furniture coatings, architectural coatings, automotive production line coatings, paper coatings, sealant and adhesive, especially suitable for paint mixing phase foam control, with excellent comprehensive performance. ​

RK-7515M silicone antifoam is made of a special silicone grease system , which is developed in conjunction with aspecially designed polyether modified silicone emulsifying system.The new silicone grease system provides excellent balance of antifoaminng properties. The special emulsifying system ensures compatibility, dilution stability and excellent shear stability of system.Small addition can achieve the optimize result. It has very excellent foam control performance which is suitable for full synthetic metal cutting liquid, semi-synthetic metal liquid and emulsified oil system. ​