Mineral Oil Defoamer For Coatings

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

M109 is a specialty monomer of wet adhesion promoter in methyl methacrylate. It can be incorporated during polymerization of solvent based resin synthesis, as well as of water based all-acrylic, vinyl- acrylic and styrene-acrylic emulsion copolymer binders for coatings, to provide outstanding wet adhesion and improved scrub resistance. M109 contains mainly cyclic heteroalkyl methacrylate and is a high performance ureido based adhesion promoting monomer. ​

T30 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural and functional coatings. T30 is a low odor, solvent, APEO and OrganoTin free product. ​

RK-63T is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and stability of dilution and shear. It has excellent antifoaming performance and stability, especially in very harsh conditions. It is used in textile dyeing, industrial cleaning, especially high temperature overflow dyeing, shear, extreme pH environment. It has good use safety in some non-silicon use fields ​

RK-561 is a modified polyether defoamer. It has excellent antifoaming performance, especially under some very harsh conditions and high shear system. It is used in textile industry, industrial cleaning, water-based ink. ​

RK-03P is composed of polydimethylsiloxane and inorganic salt. It has outstanding bubble inhibition performance and good acid and alkaline resistance. It is used in sewage treatment, textile auxiliaries and industrial cleaning ​

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, it can be used in water treatment,oilfield,mining,papermaking,etc. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-C140 endows paper or fabric with excellent water, oil and wash resistance, and is suitable for scraping and impregnating processes. It can be used for impregnation and rolling, and also for water-based adhesives on paper or fabrics that require waterproof processing, serving as an internal waterproofing agent. ​

RK-73T is a modified silicone defoamer specially designed and developed for latex system. It has excellent anti-foam performance and good compatibility. It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​