Monomer For Coatings

M108 is a specialty monomer. It can be incorporated into all-acrylic, vinyl-acrylic and styrene-acrylic emulsion copolymer binders for coatings to provide outstanding wet adhesion and improved scrub resistance. M108 contains mainly cyclic heteroalkyl methacrylate and is a high performance ureido based adhesion promoting monomer. ​

RK-701M is developed with a special silicone grease system and a specially designed polyether emulsification system. New silicone grease system provides excellent defoaming&antifoaming performance and balance. The special emuksification system makes sure compatibility of system, diluted stability and excellent stability of shear. It’s suitable for metal cutting liquid. Little addition can achieve foam control effect and reduce the negative effect on the finished products due to adding lots of defoamer. It is used in full synthetic cutting liquid and semi synthetic cutting liquid. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-F0090 is a non-silicone defoamer prepared from high-grade fatty alcohols as the main active substance through a special emulsification process, which are mainly used in eliminating and control foam in the paper machine system. No negative impact on the paper making process. ​

RK-63T is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and stability of dilution and shear. It has excellent antifoaming performance and stability, especially in very harsh conditions. It is used in textile dyeing, industrial cleaning, especially high temperature overflow dyeing, shear, extreme pH environment. It has good use safety in some non-silicon use fields ​

RK-83S is a emulsion type polyether modified organic antifoam. Compared to traditional defoamer, it is stable under strong acid, high temperature, high shear system. It has good defoaming & antifoaming performance, and safe to use. RK-83S is suitable used in the pesticide industry, textile printing&dyeing production processes, especially in high temperature overflow dyeing processes. It can also used in other typical high temperature, high shear, extreme pH environments. ​

RK-73T is a modified silicone defoamer specially designed and developed for latex system. It has excellent anti-foam performance and good compatibility. It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​

M108 is a specialty monomer. It can be incorporated into all-acrylic, vinyl-acrylic and styrene-acrylic emulsion copolymer binders for coatings to provide outstanding wet adhesion and improved scrub resistance. M108 contains mainly cyclic heteroalkyl methacrylate and is a high performance ureido based adhesion promoting monomer. ​

RK-500P is a polyether ester defoamer, which suitable used in mid-low temperature conditions, it’s widely used in general industrial sewage treatment and RO membrane sewage treatment, landfill leachate, etc. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-26T is a special modified polyether defoamer with excellent defoaming, foam inhibition and system compatibility. It is widely used in water-based systems for emulsion polymerisation, colour paste grinding, adhesives, plastic paints, industrial paints, wood furniture coatings, automotive production line coatings, architectural coatings, paper coatings, printing inks, etc. ​

RK-20S is a emulsion type polyether modified silicone antifoam, it has good acid&alkali, temperature, shear resistance, and stable in pulp washing black liquid system, no gel formation. Good foam control performance can be achieved by small dosage. Widely used in paper pulp production to prevent the foam issue in the production process, textile auxiliaries, textile dyeing, industrial cleaning, wastewater treatment, etc ​

T10 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural and functional coatings. The product contains no solvent and is a low odor, APEO and OrganoTin free one. ​

RK-PP200 is a 100% active content silicone defoamer which is easy to disperse in solvents. Under the low adding condition, it shows great defoaming and foam control performance. ​

RK-300P is a modified polyether silicone compound emulsion defoamer. It has good dispersibility in the foaming system. No silicone grease precipitation and flotation. ​

RK-T60 is a silicone polyether modified by characteristic grafting reaction, which is prepared by special emulsified system. This emulsified system makes sure compatibility, and excellent stability of dilution and shear. It has excellent antifoaming performance and stability especially under very harsh conditions. It is used in textile printing&dyeing, industrial cleaning, etc., especially suitable for high temperature overflow dyeing. RK-T60 also can be used in other typical high temperature, high shear and extreme pH environment. Safe to use in some non-silicon use fields. ​