Durability-Effective Defoaming Agent

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-T100 is a kind of defoaming agent with special emulsified and silica system, which hasexcellent dynamic defoaming, anti-foaming effect and long-lasting defoaming ability, especially under the harsh conditions. Very low addition can achieve the ideal defoaming effectand reduce the effect causedby adding largely amount defoamer.The special emulsified system makes the good compatibility, diluted stability and shear stability.​

RK-33S is a compound antifoaming agent. Under widely pH and temperature conditions, it has great performances with breaking foam fast and continuously. It’s suitable for areas with higher requirements of compatibility and transparency. And it’s widely used in daily chemical washing, laundry detergent, metal cutting liquid, textile, industrial cleaning, etc. ​

RK-106P is a kind of powder defoamer suitable for washing powder and powder detergent . It has excellent defoaming & antifoaming performance, stable in high temperature temperature and strong alkali environment. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-1100 is a special silicone synthetic defoamer suitable for non-aqueous systems. It is a cost-effective product specially designed for film production, with excellent foam suppression performance and stability. A very small amount of addition can achieve the ideal foam control effect. ​

RK-50P is a mid-low temperature polyether ester defoamer, suitable for using in paper-making industry and water treatment. ​

T90 to T104 series of rheology modifiers represent the latest advance in synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) technology. T90-T104 series provide customers the opportunity for thickener consolidation with improved performance in architectural and functional coatings. ​

RK-66T has excellent defoaming and anti-foaming properties as well as excellent compatibility, and can effectively prevent microfoam generation in high and low viscosity systems. RK-66T is suitable for water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings and water-based printing inks. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​