Hydroxyl Compound Foam Control Agent

RK-801 is a defoamer specially designed for various water-based inks and latex systems. It has excellent dynamic defoaming, antifoaming performance, long-lasting defoaming ability, and excellent compatibility. It has the properties of silicon type defoamer and the compatibility of non-silicon type defoamer. It is used in inks, latex paints and coatings, which improves the leveling and wetting of inks, paints and paints, and improves the abrasion resistance and smoothness of paints. ​

RK-26T is a special modified polyether defoamer with excellent defoaming, foam inhibition and system compatibility. It is widely used in water-based systems for emulsion polymerisation, colour paste grinding, adhesives, plastic paints, industrial paints, wood furniture coatings, automotive production line coatings, architectural coatings, paper coatings, printing inks, etc. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-P582 silicone defoamer emulsion is an emulsion type polyether modified silicone defoamer, which has excellent resistance to strong alkali&acid, temperature and shearing. It has good stability in pulping black liquor system and no gel formation. Good foam control performance can be achieved by small addition. It is widely used in the control of foam generation in pulping black liquor system, as well as in industrial cleaning, sewage treatment and other industries. ​

RK-8777 is a modified silicone defoamer specially designed and developed for latex systems. It has excellent anti-foaming performance and good compatibility.It is suitable for wood furniture paints, architectural coatings, industrial coatings, overprint varnishes and other systems in water-based systems. ​

RK-857 is a polysiloxane and polyether copolymerization defoamer with special structure of the active synergist.The special structure ensures that the compatibility of the system is unchanged and the performance is greatly improved.  It has strong antifoaming performance in water based flexo ink, water acrylic overprinting, pure acrylic emulsion, PVA, polyurethane emulsion  especially during grinding and paint mixing. ​

RK-012B is a 100% active defoamer, which has good defoaming properties against styrene/acrylic acid, pure acrylic emulsion, PVA, and water-based epoxy. It is especially suitable for addition during the grinding process of water-based color paste. ​

D105 is a high solids and efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. ​

RK-333S silicon based antifoam is a type of silicone defoamer. Compared with traditional defoamer, it maintains great stability and defoaming performance in medium-high temperatures and high shear systems. It is suitable for printing, dyeing and water treatment in the textile industry,especially for textile polyester dyeing . It can also be applied to other typical environments with high temperatures, high shear, and extreme pH ranges. ​

RK-8680 is a highly efficient and multi-purpose organic silicon synthetic defoamer suitable for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. Due to its excellent comprehensive performance, the amount added in most systems is significantly less than other types of defoamers. ​

RK-7670M uses silicone grease system, with special polyether modified silicone emulsion system. It provides excellent antifoaming performance and balance, which make sure the compatibility of system, diluted stability and excellent stability of shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the final products due to adding lots of defoamer. It is used in Semi or full synthetic cutting liquid ad emulsion type cutting liquid. ​

RK-250 is a kind of emulsion polyether modified organic antifoam which is special for aqueous foam system. It’s easy to disperse in water. In wide PH and temperature, small quantities can achieve defoaming performance. ​

RK-8876 is a defoamer developed by copolymerizing polysiloxane polyether with a special structural active synergist. This product has excellent anti foaming performance and stability. The special structure ensures that the compatibility of the system is unchanged and the performance is greatly improved. It has strong antifoaming and foam inhibition performance in waterborne epoxy, pure acrylic lotion, PVA, polyurethane lotion, especially during grinding and paint mixing ​

RK-600P is a non-silicone defoamer grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression ability performances. ​

RK-7600 is a polyther(ester) defoamer in paper industry. ​

RK-33S is a compound antifoaming agent. Under widely pH and temperature conditions, it has great performances with breaking foam fast and continuously. It’s suitable for areas with higher requirements of compatibility and transparency. And it’s widely used in daily chemical washing, laundry detergent, metal cutting liquid, textile, industrial cleaning, etc. ​