Mineral Oil-based Defoamer

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-900N is a general type silicone polyether defoamer, which is developed by adopting special silicone grease system and polyether with specially designed emulsification system. The silicone grease provide excellent balance. Emulsified system makes sure compatibility, diluted and shear stability. It is applied to foams produced in most aqueous and oily systems and has excellent antifoaming properties. ​

T30 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural and functional coatings. T30 is a low odor, solvent, APEO and OrganoTin free product. ​

RK-801 is a defoamer specially designed for various water-based inks and latex systems. It has excellent dynamic defoaming, antifoaming performance, long-lasting defoaming ability, and excellent compatibility. It has the properties of silicon type defoamer and the compatibility of non-silicon type defoamer. It is used in inks, latex paints and coatings, which improves the leveling and wetting of inks, paints and paints, and improves the abrasion resistance and smoothness of paints. ​

RK-7670M uses silicone grease system, with special polyether modified silicone emulsion system. It provides excellent antifoaming performance and balance, which make sure the compatibility of system, diluted stability and excellent stability of shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the final products due to adding lots of defoamer. It is used in Semi or full synthetic cutting liquid ad emulsion type cutting liquid. ​

RK-106P is a kind of powder defoamer suitable for washing powder and powder detergent . It has excellent defoaming & antifoaming performance, stable in high temperature temperature and strong alkali environment. ​

T90 to T104 series of rheology modifiers represent the latest advance in synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) technology. T90-T104 series provide customers the opportunity for thickener consolidation with improved performance in architectural and functional coatings. ​

T90 to T104 series of rheology modifiers represent the latest advance in synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) technology. T90-T104 series provide customers the opportunity for thickener consolidation with improved performance in architectural and functional coatings. ​

RK-0036 is a compound antifoam without precipitation after dispersing in the system. ​

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​