Mineral Oil-based Defoamer

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK- 6 3 B is a kind of emulsion type of polyether modified silicone antifoam, compared to the traditional antifoam, it has excellent defoaming and antifoaming performance. It is suitable for gel detergent, textile dyeing and auxiliaries, etc surfactant systems and water treatment. ​

D105 is a high solids and efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. ​

RK-83S is a emulsion type polyether modified organic antifoam. Compared to traditional defoamer, it is stable under strong acid, high temperature, high shear system. It has good defoaming & antifoaming performance, and safe to use. RK-83S is suitable used in the pesticide industry, textile printing&dyeing production processes, especially in high temperature overflow dyeing processes. It can also used in other typical high temperature, high shear, extreme pH environments. ​

M108 is a specialty monomer. It can be incorporated into all-acrylic, vinyl-acrylic and styrene-acrylic emulsion copolymer binders for coatings to provide outstanding wet adhesion and improved scrub resistance. M108 contains mainly cyclic heteroalkyl methacrylate and is a high performance ureido based adhesion promoting monomer. ​

RK-333S silicon based antifoam is a type of silicone defoamer. Compared with traditional defoamer, it maintains great stability and defoaming performance in medium-high temperatures and high shear systems. It is suitable for printing, dyeing and water treatment in the textile industry,especially for textile polyester dyeing . It can also be applied to other typical environments with high temperatures, high shear, and extreme pH ranges. ​

RK-1215A is a silicone defoamer, which is stable in high temperature and shear, acid system, especially the performance of fast defoaming. It’s suitable for textile printing&dyeing, industrial cleaning, metal working liquid, and other high&mid temperature, high shear, and extremely pH environment. ​

RK-66T has excellent defoaming and anti-foaming properties as well as excellent compatibility, and can effectively prevent microfoam generation in high and low viscosity systems. RK-66T is suitable for water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings and water-based printing inks. ​

RK-9110S is a defoamer specially designed for various water-based inks and latex systems. It has excellent dynamic defoaming, antifoaming performance, long-lasting defoaming ability, and excellent compatibility. It has the properties of silicon type defoamer and the compatibility of non-silicon type defoamer. It is used in inks, latex paints and coatings, which improves the leveling and wetting of inks, paints and paints, and improves the abrasion resistance and smoothness of paints. ​

RK-07P is a kind of powder defoamer suitable for foaming environment of macromolecule in water system. It has excellent defoaming & antifoaning performance in aqueous system. Chemical is stable, not toxic, not corrosive, and not sensitive to acid & alkali. ​