High Cost-Effective Mineral Oil Defoamer Antifoam

High Cost-Effective Mineral Oil Defoamer

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil.

Item NO.:
RK-707
Payment:
T/T; L/C at sight; DAP
Product Origin:
China
Color:
Light yellow opaque liquid
Lead Time:
≤7 days

inquiry now

High Cost-Effective Mineral Oil Defoamer Use

Styrene acrylic emulsion, Silicone acrylic emaulsion, acrylic emulsion, vinegar butyl acrylate emaulsion etc coating system

Waterborne latex (styrene/butadiene, acrylic acid, polyvinyl chloride and its copolymer, vinyl acetate, dichloroethylene and water-soluble alkyd)

Water based adhesives and latex paints

Thick slurry and high viscosity system

Elastic wool drawing, floor paint, leather edge oil system

Product property:

High efficiency in adhesive and coating systems

Suitable for waterborne formulation

Good performances in leather edge oil system

Break foam fast and foam control for a long time

Low addition, cost-effective

Main physical and chemical properties:

Appearance:Light yellow opaque liquid

Viscosity (25°C) :1500~8000mPa ·s

Active content:100%

pH :5.5-7.0

Application Process：

Defoamer consists of hydrophobic liquid and hydrophobic particles. It is recommended that the user should fully stir before using, even if the surface is not stratified; long-term storage may be slightly stratified, evenly mixed and used, without affecting the effect.

The additive amount is 0.2-0.6% of coating weight, added 1.0-1.5‰ at pulping process, added 1.0-1.5‰ again at paint correction. The optimum addition should be depended on specific situation. Do not dilute. If diluted with water, the antifoaming performance will be destroyed.

High Cost-Effective Mineral Oil Defoamer

Click to download related documents:Antifoam RK-707

Tags :

inquiry now

Related Products

RK-170 High Efficiency Mineral Oil Antifoam

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect.

Durability-Effective Mineral Oil Antifoam

RK-1107 Durability-Effective Defoaming Agent

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating.

RK-207 Water Based Defoaming Agent

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface.

RK-203 Mineral Oil-based Defoamer

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc.

High Compatibility Defoamer for Latex Paint

RK-980P Good compatibility Defoamer

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment.

High Compatibility Defoamer for Coatings

RK-40S Good system compatibility Defoamer

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles.

RK-170A Mineral Oil Defoamer For Coatings

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect.

T-40 Rheological Modifier For Paints

T40 is a nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is a product of APEO and OrganoTin free.

RK-63B Silicone Antifoam Emulsion

RK- 6 3 B is a kind of emulsion type of polyether modified silicone antifoam, compared to the traditional antifoam, it has excellent defoaming and antifoaming performance. It is suitable for gel detergent, textile dyeing and auxiliaries, etc surfactant systems and water treatment.

RK-328 High efficiency and low alkali liquid deinking agent

RK-328 series is an efficient, environmentally friendly and low-alkali liquid deinking agent, which is suitable for the flotation deinking of office waste paper, book paper and magazine paper at home and abroad.

D-105 High Efficiency Dispersant

D105 is a high solids and efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations.

RK-8865 High system compatibility Defoamer

RK-8865 is a modified silicone defoamer that has both the performance of silicone and the compatibility of non-silicone defoamers. It is widely used in water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings, and overprint varnishes.

RK-F0090 High Temperature Antifoam For Paper

RK-F0090 is a non-silicone defoamer prepared from high-grade fatty alcohols as the main active substance through a special emulsification process, which are mainly used in eliminating and control foam in the paper machine system. No negative impact on the paper making process.

RK-333S High Efficiency Silicone Antifoaming Agent

RK-333S silicon based antifoam is a type of silicone defoamer. Compared with traditional defoamer, it maintains great stability and defoaming performance in medium-high temperatures and high shear systems. It is suitable for printing, dyeing and water treatment in the textile industry,especially for textile polyester dyeing . It can also be applied to other typical environments with high temperatures, high shear, and extreme pH ranges.

Versatile Pigment Dispersant for Coatings

D-107 Extremely Versatile Pigment Dispersant

D107 is a sodium salt polyelectrolyte of synthetic hydrophobic copolymer. It is an extremely versatile pigment dispersant for acrylic, vinyl acrylic, and acrylic/styrene based coatings, and can be expected to give good dispersion, stability, and film properties in a broad array of coating systems. D107, a hydrophobic polymer based carboxylate polyelectrolyte, brings many formulating benefits to coatings applications including very effective with inorganic pigments, superior gloss development, good hiding at economical use levels formaldehyde free and better film formation.

RK-2200 Especially effective for microbubbles Defoamer

RK-2200 is a general and special modified non-silicon defoamer, especially suitable for polyurethane, epoxy floor paint, solvent-free UV curing, polyester system, etc. It has excellent defoaming and antifoaming performance, balanced dispersibility and extremely high compatibility, and will not precipitate in the system and form shrinkage holes.

What are you looking for?

Use smart search to quickly find what you need.

Suggested :

Silicone antifoam Fatty alcohol antifoam Polyether antifoam Antifoam compound Powder antifoam Mineral oil antifoam Other antifoam Paper Deinking Agent Rheology Modifiers：Rheology Control Additives Industrial Dispersing Agents Specialty monomer for coating Polyacrylamide（PAM）

Click Here To Leave A Message

Leave A Message

inquiry now

Looking for News?

Our hours

Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)

Home

Products

contact