Mineral Oil-based Defoamer

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

M109 is a specialty monomer of wet adhesion promoter in methyl methacrylate. It can be incorporated during polymerization of solvent based resin synthesis, as well as of water based all-acrylic, vinyl- acrylic and styrene-acrylic emulsion copolymer binders for coatings, to provide outstanding wet adhesion and improved scrub resistance. M109 contains mainly cyclic heteroalkyl methacrylate and is a high performance ureido based adhesion promoting monomer. ​

RK-07P is a kind of powder defoamer suitable for foaming environment of macromolecule in water system. It has excellent defoaming & antifoaning performance in aqueous system. Chemical is stable, not toxic, not corrosive, and not sensitive to acid & alkali. ​

RK-7470M is developed with a special silicone grease system, with specially designed emulsion system. It provides excellent antifoaming performance and balance, which makes sure the compatibility of system, excellent stability of dilution and shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the finished products due to adding lots of defoamer. It is used in full synthetic cutting liquid and emulsion type cutting liquid. ​

RK-1215A is a silicone defoamer, which is stable in high temperature and shear, acid system, especially the performance of fast defoaming. It’s suitable for textile printing&dyeing, industrial cleaning, metal working liquid, and other high&mid temperature, high shear, and extremely pH environment. ​

RK-9864 is a special polysiloxane and polyether copolymerization defoamer with special structure of the active synergist. It has strong anti-foaming performance in polyurethane, acrylic emulsion system, wood furniture coatings, architectural coatings, automotive production line coatings, paper coatings, sealant and adhesive, especially suitable for paint mixing phase foam control, with excellent comprehensive performance. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-F0090 is a non-silicone defoamer prepared from high-grade fatty alcohols as the main active substance through a special emulsification process, which are mainly used in eliminating and control foam in the paper machine system. No negative impact on the paper making process. ​

RK-600P is a non-silicone defoamer grafted with functional modified polyether. It has good dispersibility, fast defoaming and strong dynamic foam suppression ability performances. ​

RK-250 is a kind of emulsion polyether modified organic antifoam which is special for aqueous foam system. It’s easy to disperse in water. In wide PH and temperature, small quantities can achieve defoaming performance. ​