RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-23S is a kind of silicone defoamer, it has excellent defoaming&antifoaming performance at low dosage. It’s mainly used in textile printing & dyeing and water treatment processes. ​

The fluorine-free water-based weak cationic non-fluorine oil repellent agent RK-C004 has an oil repellent temperature range of 5-60℃. It has strong fiber bonding ability, thereby endowing paperboard molded fiber products with excellent oil repellent properties. ​

RK-9110S is a defoamer specially designed for various water-based inks and latex systems. It has excellent dynamic defoaming, antifoaming performance, long-lasting defoaming ability, and excellent compatibility. It has the properties of silicon type defoamer and the compatibility of non-silicon type defoamer. It is used in inks, latex paints and coatings, which improves the leveling and wetting of inks, paints and paints, and improves the abrasion resistance and smoothness of paints. ​

RK-30N is a kind of emulsion type polyether modified silicone antifoam. Compared to traditional antifoam, it shows very good stability in the system, and good performance at high temperature. It is suitable for the internal added of textile auxiliary, such as refining agent, and internal application of daily washing liquid. ​

RK-50P is a mid-low temperature polyether ester defoamer, suitable for using in paper-making industry and water treatment. ​

RK-2200 is a general and special modified non-silicon defoamer, especially suitable for polyurethane, epoxy floor paint, solvent-free UV curing, polyester system, etc. It has excellent defoaming and antifoaming performance, balanced dispersibility and extremely high compatibility, and will not precipitate in the system and form shrinkage holes. ​

RK-328 series is an efficient, environmentally friendly and low-alkali liquid deinking agent, which is suitable for the flotation deinking of office waste paper, book paper and magazine paper at home and abroad.​

RK-8636 is a modified silicone antifoam which is prepared by emulsification of modified polysiloxane and modified polyether in a special process. It has fast defoaming and long antifoaming persistence performance. It’s widely used in industrial cleaning, all kinds of sewage treatment and textile printing, etc. ​

M108 is a specialty monomer. It can be incorporated into all-acrylic, vinyl-acrylic and styrene-acrylic emulsion copolymer binders for coatings to provide outstanding wet adhesion and improved scrub resistance. M108 contains mainly cyclic heteroalkyl methacrylate and is a high performance ureido based adhesion promoting monomer. ​