RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-1100 is a special silicone synthetic defoamer suitable for non-aqueous systems. It is a cost-effective product specially designed for film production, with excellent foam suppression performance and stability. A very small amount of addition can achieve the ideal foam control effect. ​

D105 is a high solids and efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. ​

RK-07P is a kind of powder defoamer suitable for foaming environment of macromolecule in water system. It has excellent defoaming & antifoaning performance in aqueous system. Chemical is stable, not toxic, not corrosive, and not sensitive to acid & alkali. ​

T80 is a high solids and nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is APEO and OrganoTin free. ​

RK-0036 is a compound antifoam without precipitation after dispersing in the system. ​

RK-857 is a polysiloxane and polyether copolymerization defoamer with special structure of the active synergist.The special structure ensures that the compatibility of the system is unchanged and the performance is greatly improved.  It has strong antifoaming performance in water based flexo ink, water acrylic overprinting, pure acrylic emulsion, PVA, polyurethane emulsion  especially during grinding and paint mixing. ​

RK-33S is a compound antifoaming agent. Under widely pH and temperature conditions, it has great performances with breaking foam fast and continuously. It’s suitable for areas with higher requirements of compatibility and transparency. And it’s widely used in daily chemical washing, laundry detergent, metal cutting liquid, textile, industrial cleaning, etc. ​

RK-30N is a kind of emulsion type polyether modified silicone antifoam. Compared to traditional antifoam, it shows very good stability in the system, and good performance at high temperature. It is suitable for the internal added of textile auxiliary, such as refining agent, and internal application of daily washing liquid. ​

RK-20S is a emulsion type polyether modified silicone antifoam, it has good acid&alkali, temperature, shear resistance, and stable in pulp washing black liquid system, no gel formation. Good foam control performance can be achieved by small dosage. Widely used in paper pulp production to prevent the foam issue in the production process, textile auxiliaries, textile dyeing, industrial cleaning, wastewater treatment, etc ​