High Efficiency Fatty Alcohol Antifoam

RK-F0090 is a non-silicone defoamer prepared from high-grade fatty alcohols as the main active substance through a special emulsification process, which are mainly used in eliminating and control foam in the paper machine system. No negative impact on the paper making process. ​

RK-F0020 is a silicone free defoaming agent prepared from special high-grade fatty alcohols as the main active substance through special emulsification, which is mainly used in degassing and control foam in the paper machine and paper making waste water treatment industries and fermentation. ​

RK- 6 3 B is a kind of emulsion type of polyether modified silicone antifoam, compared to the traditional antifoam, it has excellent defoaming and antifoaming performance. It is suitable for gel detergent, textile dyeing and auxiliaries, etc surfactant systems and water treatment. ​

RK-0036 is a compound antifoam without precipitation after dispersing in the system. ​

RK-801 is a defoamer specially designed for various water-based inks and latex systems. It has excellent dynamic defoaming, antifoaming performance, long-lasting defoaming ability, and excellent compatibility. It has the properties of silicon type defoamer and the compatibility of non-silicon type defoamer. It is used in inks, latex paints and coatings, which improves the leveling and wetting of inks, paints and paints, and improves the abrasion resistance and smoothness of paints. ​

D105 is a high solids and efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. ​

RK-30C is made by using special modified silicone polyether system. Compared with the traditional defoaming agent, it maintains good stability and high temperature performance in the system. It’s suitable for gear oil, high temperature boiling point distillation, asphalt production , benzene extraction process, transportation and other high temperature solvent foaming systems. ​

T50 is a high solids and nonionic hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier designed for waterborne architectural, industrial and functional coatings. It is APEO and OrganoTin free. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-8680 is a highly efficient and multi-purpose organic silicon synthetic defoamer suitable for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. Due to its excellent comprehensive performance, the amount added in most systems is significantly less than other types of defoamers. ​

RK-8455S is a silicone antifoam, which is prepared by composite emulsification of silicon emulsifier and hydrocarbon emulsifier based on crosslinked polysiloxane as defoaming active component. It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of pulp washing black liquid , wastewater treatment, cleaning industry, oil field chemical industry, etc. ​

RK-P582 silicone defoamer emulsion is an emulsion type polyether modified silicone defoamer, which has excellent resistance to strong alkali&acid, temperature and shearing. It has good stability in pulping black liquor system and no gel formation. Good foam control performance can be achieved by small addition. It is widely used in the control of foam generation in pulping black liquor system, as well as in industrial cleaning, sewage treatment and other industries. ​

RK-76T has excellent defoaming and anti-foaming properties as well as excellent compatibility, and can effectively prevent microfoam generation in high and low viscosity systems. RK-76T is suitable for water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings and water-based printing inks. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-333S silicon based antifoam is a type of silicone defoamer. Compared with traditional defoamer, it maintains great stability and defoaming performance in medium-high temperatures and high shear systems. It is suitable for printing, dyeing and water treatment in the textile industry,especially for textile polyester dyeing . It can also be applied to other typical environments with high temperatures, high shear, and extreme pH ranges. ​

RK-9110S is a defoamer specially designed for various water-based inks and latex systems. It has excellent dynamic defoaming, antifoaming performance, long-lasting defoaming ability, and excellent compatibility. It has the properties of silicon type defoamer and the compatibility of non-silicon type defoamer. It is used in inks, latex paints and coatings, which improves the leveling and wetting of inks, paints and paints, and improves the abrasion resistance and smoothness of paints. ​