Mineral Oil Defoamer For Coatings

RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-40S is a multi-purpose silicone synthetic defoamer for non-aqueous systems. It is particularly suitable for foam control in oil-based inks for printed circuit boards and epoxy floor paint systems. It has good defoaming properties and can quickly eliminate small bubbles. ​

RK-801 is a defoamer specially designed for various water-based inks and latex systems. It has excellent dynamic defoaming, antifoaming performance, long-lasting defoaming ability, and excellent compatibility. It has the properties of silicon type defoamer and the compatibility of non-silicon type defoamer. It is used in inks, latex paints and coatings, which improves the leveling and wetting of inks, paints and paints, and improves the abrasion resistance and smoothness of paints. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-400S is a silicone antifoam, which is prepared by composite emulsification of silicon emulsifier and hydrocarbon emulsifier based on crosslinked polysiloxane as defoaming active component. It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of wastewater treatment, cleaning industry, oil field chemical industry, etc. ​

RK-360 is a silicone polyether modified antifoam without precipitation after dispersing in the system. ​

RK-F0020 is a silicone free defoaming agent prepared from special high-grade fatty alcohols as the main active substance through special emulsification, which is mainly used in degassing and control foam in the paper machine and paper making waste water treatment industries and fermentation. ​

RK-9855 is a defoaming product with outstanding defoaming ability, wide application range and excellent compatibility. It is widely used in a variety of latex systems. ​

RK-1215A is a silicone defoamer, which is stable in high temperature and shear, acid system, especially the performance of fast defoaming. It’s suitable for textile printing&dyeing, industrial cleaning, metal working liquid, and other high&mid temperature, high shear, and extremely pH environment. ​

RK-900P is a non-silicone antifoaming agent with hydroxy compound and synergist. It has great performance of foam inhibition persistent, alkali and acid resistance. It can resist high temperature above 100 ℃. It mainly used in alumina refinery bayer process. ​

RK-2200 is a general and special modified non-silicon defoamer, especially suitable for polyurethane, epoxy floor paint, solvent-free UV curing, polyester system, etc. It has excellent defoaming and antifoaming performance, balanced dispersibility and extremely high compatibility, and will not precipitate in the system and form shrinkage holes. ​