RK-170 is mainly use the large coefficient of osmosis of mineral oil and hydrophobic particles as antifoaming active material, supplemented by antifoaming synergistic substance. Mineral oil increase osmotic speed. The hydrophobic particles reduce antifoaming synergistic material into the barriers. The interaction provides great antifoaming performance. Meanwhile, mineral oil has good affinity with organic matter so that it doesn’t cause surface defect. ​

RK-1107 is a 100% active content mineral oil defoamer, which is specially designed for emulsion polymerization, suspension polymerization, emulsion adhesives, etc.. It’s very high efficiency, great persistence and compatibility. It’s also confirmed that it is effective for curtain coating. ​

RK-207 is a high efficient liquid(wetting) defoamer based on new polymer, which is combined with active antifoaming carrier oil components. It’s effective for fine resin emulsion and added into any processes of latex paint production, it’s also suitable for polymerization processes. Also, it has high compatibility with the system, no precipitation and formation of shrinkage cavities on the surface. ​

RK-203 is metal soap, wax mineral oil-based defoamer. It is mainly used in paper coating, textile printing, water based architectural paint emulsion and paint made by this emulsion, waterproof coating, etc. ​

RK-707 is mainly made of mineral oil with large expansion coefficient and hydrophobic particles as defoaming active substances, assisted by defoaming synergistic substances. Mineral oil increases the expansion velocity of defoaming particles, and hydrophobic particles reduce the entry energy barrier of defoaming particles. The interaction between the two provides excellent defoaming performance. At the same time, mineral oil has a good affinity with organic matter, so it will not cause surface defects. It is mainly used in the emulsion and latex of water-based coatings, and the adhesive made by the emulsion or latex and waterborne building coatings. The effect is more obvious in the system with higher viscosity. It also can be used in the leather edge oil. ​

RK-980P is a 100% active content mineral oil antifoam. It’s very high efficiency, great persistence and compatibility, which is suitable for acrylic acid, vinyl acetate, acetic acid, styrene-acrylic, copolymer emulsion, coating, resin, detergent, sewage treatment. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-7670M uses silicone grease system, with special polyether modified silicone emulsion system. It provides excellent antifoaming performance and balance, which make sure the compatibility of system, diluted stability and excellent stability of shear. It’s suitable for metal cutting liquid. Little addition can achieve ideal foam control effect and reduce the negative effect on the final products due to adding lots of defoamer. It is used in Semi or full synthetic cutting liquid ad emulsion type cutting liquid. ​

D105 is a high solids and efficiency synthetic hydrophilic copolymer pigment dispersant. It provides outstanding performance and cost effectiveness in a wide range of acrylic, vinyl acrylic, and acrylic/styrene based latex paints from low sheen flats to high gloss enamels. It has been designed to maximize gloss potential with good flow and wet adhesion in interior and exterior high gloss and semi-gloss formulations. ​

RK-50P is a mid-low temperature polyether ester defoamer, suitable for using in paper-making industry and water treatment. ​

Cationic Polymer Powder is water-solubel polymers which is insoluble in most organic solvents, with good flocculation, They are widely used in water treatment, mining, oilfield, paper and other application industries. ​

RK-8KD is defoamer emulsion contained silicone oil and hydrophobic particles It has better acid&alkali resistance and excellent defoaming&antifoaming persistence. It’s widely used in all kinds of wastewater treatment, cleaning industry, pesticide industry, etc.. ​

RK-170A is mainly use the mineral oil with large spreading coefficient and hydrophobic particles as anti-foaming active materials, supplemented by anti-foaming synergistic substance. Mineral oil increases the spreading speed of anti-foaming particles, and the hydrophobic particles reduce the entry barrier of anti-foaming particles. The interaction between these two provides great anti-foaming performance. Meanwhile, mineral oil has good affinity with organic matter, so it doesn’t cause surface defect. ​

RK-76T has excellent defoaming and anti-foaming properties as well as excellent compatibility, and can effectively prevent microfoam generation in high and low viscosity systems. RK-76T is suitable for water-based systems such as container paints, wood furniture paints, architectural coatings, industrial coatings and water-based printing inks. ​

T90 to T104 series of rheology modifiers represent the latest advance in synthetic Hydrophobically modified Alkali-Swellable anionic associative Emulsion thickener (HASE) technology. T90-T104 series provide customers the opportunity for thickener consolidation with improved performance in architectural and functional coatings. ​

RK- 6 3 B is a kind of emulsion type of polyether modified silicone antifoam, compared to the traditional antifoam, it has excellent defoaming and antifoaming performance. It is suitable for gel detergent, textile dyeing and auxiliaries, etc surfactant systems and water treatment. ​